Skip to main content

Sony FX3 / FX3A

Connection​

The Sony FX3 is fully compatible with bitbox over USB-C, which provides data (USB Ethernet). Power must be provided externally, as the FX3 USB-C port does not provide power. bitbox Mini is compatible using a third party USB-C Ethernet dongle, though we are unable to officially recommend any as compatibility with newer dongles on the market is difficult to determine.

info

bitbox must be externally powered with the FX3 and FX3A.

Control Options​

The FX3 has no web remote control.

Software Control​

Sony Monitor & Control App on iOS and Android. Middle Control Pro is a native macOS control application for Sony cameras.

Hardware Control​

To control all aspects of the FX3, we recommend the CyanView Rio.

Camera Configuration​

  1. Go to Menu → 🌐 → 7. Wired LAN
  2. Select IP Address Setting → Manual
  3. Configure your IP address (see IP Addressing for more information)
  4. Make sure to set a gateway and a subnet mask. A gateway is required even if you do not have an internet connection.
warning

A gateway must be configured or TCP/IP will not work on the FX3/FX3A. You can set it to any IP in the same subnet range. If you are using our guide, setting it to 10.10.10.1 would suffice. It does not need to be a live IP.

  1. Go to Menu → 🌐 → 9. Network Option - Access Authen. Settings and confirm it is On.
  2. Set username and password.
  3. Go to Menu → 🌐 → 8. USB-LAN/Tethering - USB-LAN Connection and select. The camera will Prepare Connection for a few seconds and then should say Connected
  4. Go to Menu → 🌐 → 1. Cnct./Remote Sht. - Remote Shoot Function and select ON

Monitor & Control Configuration​

  1. Confirm the IP Address is configured on the tablet/phone. For iPad OS / iOS devices, please refer to this article.
  2. In Monitor & Control, select Wired LAN
  3. Select the desired camera
  4. Monitor & Control should ask for credentials
warning

Similar to the camera, the iPad / iPhone must also have a gateway configured for Monitor & Control to function.

Common Issues / Troubleshooting​

The FX3 USB-C port is not providing power​

You must power bitbox externally with FX3, as the USB-C port does not provide power.

Does FX3 have a web remote?​

No, you will need to use one of the applications listed above.

Can I use bitbox Mini with FX3?​

Yes, however, you will need to use a USB to Ethernet dongle. We can't advise on any compatible third party dongles.

Sony FX3 Manual - USB Ethernet

Sony FX3A Manual - USB Ethernet